• 24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud
  • 24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud
  • 24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud
  • 24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud
  • 24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud
  • 24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud

24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud

Type: Aluminum Alloy Road Stud
Application: Road
Reflectors: Reflector
Number of Reflective Surfaces: Double-Side
Certification: CE, Mutcd, ASTM, AS/NZS, RoHS
Material: Aluminium
Customization:

Contact Supplier

Diamond Member Since 2013

Suppliers with verified business licenses

Rating: 5.0/5
Trading Company

Basic Info.

Size
100*105*19mm
Color
White and Yellow
Packaging
Cartons
View Distance
Over 800m
Light Source
Super Luminosity LED
Transport Package
Pallet
Specification
RoHS
Trademark
JACKWIN
Origin
Wuhan, Hubei, China
Production Capacity
5000 PCS/Month

Product Description

 24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud

Tunnel wired road studs is also called photoelectric pavement marker,LED road stud and road
pavement marker.The mainly function is Pavement sight induced warning.It Is a clear,
eye-catching adjustable active flashing light led road signs,Continuously laying a light-emitting
lane contour line.
It is not only play excellent guide obvious warning but also add beautiful landscape.It is mainly
install in the main highways, tunnels, approaches shoulder, around the island, traffic islands,
underground parking entrance of the tunnel wall and the curb or on the road along the side walls.

24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud
 

Features of Aluminum WIred Road Stud:

1.Working voltage: 24VDC or 220VAC
2.Using high brightness LED light source, double-sided light, luminous uniform, soft light, no
glare, good stability. Our new plate imported from Taiwan LED chip, more than ten years has
been very focused traffic stable.
3.Constant product installation, interference chips, LED use of more stable and longer life, the
light fades smaller life> 3 years.
4.Equipped with spike protection circuit can be the product of effective protection, improve
product performance, to avoid a single internal fault protruding signs induced impact on the
entire system.
5.Warning strong, visible from up to 500 meters
6.Energy saving, low power consumption, long life, standard double-sided light emitting power is
only induced 0.72W, power is only one side of the light emitting guide signs 0.36W (with 12
yellow lights as standard),.
7.Exquisite appearance, the body of plastic material; translucent body with transparent
polycarbonate, good transparency; sealants use modified silicone resins
8.Easy to install, safe to use, low failure rate
9.Compression of up to 20 tons.
10.Protection class: IP67.

roduct Name

Aluminum WIred Road Stud

LED Color

White and Yellow

Shell Material

Aluminum or Plastic

Size

100*105*19mm

Weight

350 g/pc

Power

<1W

Light intensity

>3000 mcd

LED QTY

6PCS white and 6PCS yellow (can customize)

Visual Distance

>800 Meters

Protect Level

IP67

Work Temperature

-30°C +70°C

Weight Capacity

>20 Tons

Warranty

12 Months

Lifespan

≥100000 hours

Working voltage

24V DC(or 220VAC)
Main Device Shell,LED,Switched-mode power supply,Constant current protection
circuit,wire,resin package

Chip Brand

Epistar

Packaging

epoxy resin
Connection 0.5--1.0mflexible wire,use heat-shrinkable t bush connection or Plug wire
connection
Mounting Stainless steel screw and nylon pipe-expansion fixed or special glue for road
stud
Wiring method Brown wire is positive pole and blue wire is negative pole

Flashing Method

Flashing or steady
Control Method dial switch,can be used by PLC remote control,RS232 and RS485 control

Fault Detection

open circuit,Overload detection
Malfunction output Two-way independent fault output point,Can use remote control detection
Overload
protection
Each route is higher than 2.8 A then it will be automatic protection 
24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud
24VDC LED Wired Road Markers Plastic LED Tunnel Reflective Flashing Stud

Installation of Wired Road Stud
1. When install the road studs,it need Set security facilities and configuring security personnel to
ensure the safety of the installation work carried out.
2. Need check the location of the installation required a flat, specifications.
3. Try to choose sunny weather construction to make sure the floor is clean, dry (with fixed spike
glue must be clean, dry ground).
4. When the glue is installed: appropriate amount of glue needed to ensure that the bottom was
saturated sticky glue, such as glue, there is the need to clean up the spill,
Press the spike at the installation location, ensure correct orientation.
5. Cast aluminum with foot installation: holes deeper than "nail pin" depth 1cm, hole diameter is
larger than the "nail pin" diameter 2mm (control between 2-5mm).
6. After installation is complete, once inspections to ensure proper installation position of the
spike, there is no anti-loaded, installed crooked.
7. After curing spike more than 4 hours, evacuate install security isolation facilities.

Company Profile:
JACKWIN is a professional supplier, specialized in developing, designing, manufacturing and exporting a wide range of roadway safety,parking,site and construction facilities.We have a broad range of products that we self-designed with excellent quality for clients' choice and the strong ability for injection and blowing moulding process in our R&D department makes plastic products in various sizes, shapes and colors with superior strength in short lead-time with lower developing and manufacturing cost to satisfy customers from allover the world.
Our products cover the markets in North and South America, Europe,East Asia, the Middle East and Africa and we emphasize on goods quality to meet clients' requirements and win markets in their areas. We have a strict and perfect Quality Control System that makes each process have high quality standard not only in material and half-products but in final products.
 
"High Quality, Reasonable Price, Best Service, Right & Prompt Delivery"  is our company's philosophy, we commit ourselves to innovate products to meet various needs of our clients and promote equal and mutual-benefits business relationships.
Our company can supply OEM and ODM services for customers all over the world, welcome to visit our website and inquire for catalogue and price at any time.

Aftersale Service:
1.Two year warranty policy.
2.We test all the products 3 times before delivery.
3.Good delivery time.
 
Payment:
Payment: L/C,  T/T  Western Union,  Trade Assuarance,  Paypal

 
FAQ:
Q: Can your produce customized goods ?     
A: Yes, the size, the height and the weight can be produced as per client's requirements.  
Q: Can you print words on products as per client's requirement?   
A: Yes, make label according to your exact requirement.    
Q: Can you do business via Ali Online Transaction?      
A: Yes, we can make the deal through AOT.     
Q: What is your payment terms?   
A: T/T, L/C at sight or Paypal.   
Q: Do you accept OEM?    
A: Yes, OEM or ODM are both OK.  
Q: Where is your nearest loading port ?   
A: Ningbo, China.   
Q: How can you guarantee the quality or any warranty?  
A: If have any quality problems during use, all the products can be returned or according to consumer's requests.

 

Send your message to this supplier

*From:
*To:
avatar Mr. Jackie Chen
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now